AMS No-Dig Fleet
AMS has a wide range of Vermeer Horizontal Directional Drilling rigs suitable for all tasks.
D100x120 (1 No.)
Powered by a Tier II John Deere 6068 engine, the D100x120 Series II features 12,000 ft-lb (16,270 Nm)
of rotational torque and 100,000 lb (45,359 kg) of pullback. This commanding combination results in ease and efficient
handling of large products. In addition, the D100x120 HDD provides high mudflow with a 200 gpm (757 L/min) on-board pump
for backreaming efficiency and powering of downhole mud motors. The D100x120 takes operator efficiency to a
new level with a state of the art operator's station. The unique operator’s station can be swiveled with the
push of a button. Dual joystick controls integrate mud flow, breakout vise and throttle control functions into the
thrust and rotation controls providing the operator with fingertip control of these functions. Drilling pressure
gauges, a flow meter, and a drilling fluid pump monitoring system are all strategically located between the
operator and the bore path.
|
Specifications:
|
|
Torque
|
12,000 ft-lb (16269.8 Nm)
|
|
Thrust
|
100000 lbs. (45359.24 kg)
|
|
Pull Back
|
100000 lbs. (45359.24 kg)
|
|
Mud Flow
|
200 gpm (757.08 L/min.)
|
D50x100 (1 No.)
The D50x100 is suitable for installation of up to a maximum of 800mm diameter pipe, length dependent on ground conditions.
|
Specifications:
|
|
Torque
|
10,000 ft-lb (13,588 Nm)
|
|
Pull Back
|
55,000 lbs. (24,948 kg)
|
|
Mud Flow
|
150 gpm (568 L/min.)
|
|
Stem Carrying Capacity
|
360' (109.7 m)
|
|
Length of Drill Stem
|
15' (4.5 m)
|
D36x50 (1 No.)
When you need a mid-sized drill with big features, look no further than the Vermeer D36x50 Series II NAVIGATOR. With
the highest power-to-size ratio in it's class the D36x50 Series II is powered by a 140 hp (104 kw) engine and
delivers 4928 ft-lb (6681 Nm) of rotary torque and 33,000 lb (14,969 kg) of thrust with 36,000 lb (16,329 kg) of
pullback. It's narrowly designed rack and pinion design helps to maintain a small footprint for access into congested
areas. The D36x50 Series II is built to perform a wide range of medium diameter, mid-to-long distance utility
installations.
|
Specifications:
|
|
Torque
|
4995 ft-lb (6772.3 Nm)
|
|
Thrust
|
32700 lbs. (14832.5 kg)
|
|
Pull Back
|
36000 lbs. (16329.3 kg)
|
|
Mud Flow
|
50 gpm (189.3 L/min.)
|
D33x44 (2 No.)
The D33x44 is suitable for installation of up to a maximum of 500mm diameter pipe, length dependent on ground conditions.
|
Specifications:
|
|
Torque
|
4400 ft-lb (5957 Nm)
|
|
Pull Back
|
33,000 lbs. (14,969 kg)
|
|
Mud Flow
|
50 gpm (189 Lpm)
|
|
Stem Carrying Capacity
|
600' (182.9 m)
|
|
Length of Drill Stem
|
10' (3.1 m), 15' (4.6 m)
|
D24x40A (7 No.)
The D24x40A is suitable for installation of up to a maximum of 355mm diameter pipe, length dependent on ground conditions.
|
Specifications:
|
|
Torque
|
4000 ft-lb (5424 Nm)
|
|
Pull Back
|
23,800 lbs. (10,796 kg)
|
|
Mud Flow
|
19 gpm / 38 gpm (72 Lpm / 144 Lpm)
|
|
Stem Carrying Capacity
|
500' (152.4 m)
|
|
Length of Drill Stem
|
10' (3.0 m)
|
D6 (1 No.)
The D6 is suitable for installation of up to a maximum of 90mm diameter pipe,
lengths of up to 50m dependent on ground conditions.
Suitable for utility work and small bore pipe in confined spaces.
|
Specifications:
|
|
Torque
|
1100 ft-lb (1489 Nm)
|
|
Pull Back
|
7800 lbs. (3538) kg
|
|
Mud Flow
|
9 gpm (34 Lpm)
|
|
Stem Carrying Capacity
|
198' (60.4 m)
|
|
Length of Drill Stem
|
6' (1.8 m)
|
|
